2.6 Deep Dive Platform

Place the frame over the corrugated plastic sheet. Mark the locations of 6 cable tie slots as shown. The locations are not critical. Punch or cut slots for cable ties. A large flat blade screwdriver works best for punching slots in plastic sheet.

The red tape around the small hole increases the visibility of the hole during competition.

Deep Dive Platform Parts List

Item	Unit	Qty.
1/2" Sch 40 PVC Elbow	Each	6
1/2" Sch 40 PVC Tee	Each	1
1" x 1/2" Sch 40 Reducing Bushing	Each	1
1/2” Sch 40 PVC Pipe X 2" Long	Each	2
1/2” Sch 40 PVC Pipe X 6" Long	Each	2
1/2” Sch 40 PVC Pipe X 10" Long	Each	2
1/2” Sch 40 PVC Pipe X 13" Long	Each	1
1/2” Sch 40 PVC Pipe X 24" Long (adjust for pool depth)	Each	1
Polypropylene Corrugated Sheet, .157 Thick, 11" X 14"	Each	1
#8 X 5/8" Stainless Steel Flanged Head Self-Drilling Screw	Each	15
6" - 8" Cable Tie	Each	6
Red duct tape		As req'd