2025 SeaPerch Season Resources
Pool Course Build Manual - 2025 SeaPerch Challenge
Pool Course Build Manual - 2025 SeaPerch Challenge
  • 2025 International SeaPerch Challenge Pool Courses Build Guide
  • Resources
  • General Notes
  • Section 1: Obstacle Course Build Guide
    • 1.1 Suspended Obstacle Course
    • 1.2 Obstacle Course Hoops
    • 1.3 Suspension Ropes
    • 1.4 Pool Floor Obstacle Course
  • Section 2: Mission Course Build Guide
    • 2.1 Task Platforms
    • 2.2 Surface Vessel
    • 2.3 Back Platform Assembly
    • 2.4 Bio-Bucket Hatch
    • 2.5 Coral Tree
    • 2.6 Deep Dive Platform
    • 2.7 Front Platform Assembly
    • 2.8 Marine Life
    • 2.9 Sensors
  • Construction Tips
  • Regional Course Tips
Powered by GitBook
On this page
Export as PDF
  1. Section 2: Mission Course Build Guide

2.6 Deep Dive Platform

Previous2.5 Coral TreeNext2.7 Front Platform Assembly

Last updated 8 months ago

Place the frame over the corrugated plastic sheet. Mark the locations of 6 cable tie slots as shown. The locations are not critical. Punch or cut slots for cable ties. A large flat blade screwdriver works best for punching slots in plastic sheet.

The red tape around the small hole increases the visibility of the hole during competition.

Deep Dive Platform Parts List

Item
Unit
Qty.

1/2" Sch 40 PVC Elbow

Each

6

1/2" Sch 40 PVC Tee

Each

1

1" x 1/2" Sch 40 Reducing Bushing

Each

1

1/2” Sch 40 PVC Pipe X 2" Long

Each

2

1/2” Sch 40 PVC Pipe X 6" Long

Each

2

1/2” Sch 40 PVC Pipe X 10" Long

Each

2

1/2” Sch 40 PVC Pipe X 13" Long

Each

1

1/2” Sch 40 PVC Pipe X 24" Long (adjust for pool depth)

Each

1

Polypropylene Corrugated Sheet, .157 Thick, 11" X 14"

Each

1

#8 X 5/8" Stainless Steel Flanged Head Self-Drilling Screw

Each

15

6" - 8" Cable Tie

Each

6

Red duct tape

As req'd